Recording functions
Naviclick programmes guide
For certain channels your DTH 8000 offers a daily and sometimes following day TV programme guide.The information that it provides come from the Teletext and NexTView services broadcast by certain channels.The updating of Naviclik information is carried out once every 24 hours. Naviclick allows you to display on your screen the programmes of those channels and to select the broadcasts you wish to record simply by clicking on them.
Consulting the TV guide with Naviclick
1. When you are watching a channel, press the GUIDE key to display the Naviclick page. | EN |
Note: the downloading of Naviclick data (at 3am or 8am) can be quite long (up to 2 hours). During this time you should not use your DTH 8000, nor turn it on or have a programme programmed for recording during this updating time (from 3am to 5am or 8am to 10am) otherwise the information will be lost. For countries that provide the NexTView service we recommend that you set the downloading time to 3am.The full guide of TV programmes can only be consulted the following day after an initial installation. It is necessary to allow your DTH 8000 to download the guide at the time set in the Naviclick Setup menu (page 56).
2.Use the 
, 
keys to go from one page to another (from one channel to another) or to browse through the current channel’s list of programs ( 
, 
).To consult the programs of
the channels at a given time, choose a program from the list (e.g.: 9 o’clock news) and use the ( 
, 
) keys to move on to the programs of the other channels.
Note: if the Naviclick guide does not give you satisfaction, check the parameters as shown on page 56.
Recording through the Naviclick TV guide
1.Select a channel on your DTH 8000.
2.Press the GUIDE key and wait for the Naviclick page to appear.
3.Use the 
, 
keys to place yourself on the program you want to record.To go from one channel to another, use the PR+/PR- keys or 
, 
keys.
4.Press OK to confirm your selection.
The programming contents appears. It tells you which recordings have already been programmed. Press the MENU key to return to the Main Menu or for more details on each programming set, select the one that interests you with the 
, 
keys and confirm with OK.The Timers menu appears with all the programming parameters.You can correct this data then select Keep Timer to validate the programming. Press CLEAR to remove the
5.You can turn off your DTH 8000 or leave it turned on (don’t forget to load a DVD+R or DVD+RW disc). In this case the DTH 8000 will automatically seek the channel to automatically record at the correct recording time.
Note: for the correct downloading of the programme guide, the clock of your DTH 8000 must be set (page 6).
25
