Technicolor - Thomson DTH8000 manual Channel update

DTH8000_en(EB-UB) 18/12/03 14:48 Page 8

Connections and initial set up

Channel update

If new channels make their way into the audiovisual scene, you will have to update your DTH 8000’s list of channels. In such a case, start a new channel search from the installation menu.This set-up deletes all stored channels and resets all the channels that your DTH 8000 can receive. If you only want to set-up a single channel, refer to the manual search on page 7.

1.If the main menu is not displayed, press the MENU key.

2.Select the Setup line using the or keys, and press OK to validate.

3.Select the Installation line using the or keys, and press OK to validate.

4.Select the Channel search line using the or keys, and press OK to validate.

An installation window will appear. A cursor shows the progress in the set-up of the channels.When all the channels that you can receive in your area have been stored, 100 % is indicated. Press OK to return to the Channel search line. Press MENU to return to the Main Menu.

Clock setting

Your DTH 8000 has an automatic time setting system which recognises the time signals put out by certain channels. If your DTH 8000 is not set at the right time, you can reset it by following the instructions below;

1.If the Main Menu is not displayed, press the MENU key.

2.Select the Setup line using the or keys, and press OK to validate.

3.Select the Installation line using the or keys, and press OK to validate.

4.Select the Clock Setup line using the or keys, and press OK to validate.

5.year is highlighted. Enter the year’s 4 digits (press 2, 0, 0, 3 for 2003).

6.Then enter the 4 digits of the date (press 1, 5, 0, 5 for 15th May).

7.Enter the 4 digits of the time

(press 1, 5, 5, 9 for 15:59 (03:59 PM).

8.Press OK to confirm.

Sorting the channels

1.If the Main Menu is not displayed, press the MENU key.

2.Select the Setup line using the or keys, and press OK to validate.

3.Select the Installation line using the or keys, and press OK to validate.

4.Select the Channel List line using the or keys, and press OK to validate. Refer to the Channel Sorting paragraph on page 6 to check or sort out the channels stored on your DTH 8000.

8