Technicolor - Thomson DTH8005 warranty Sockets and cables inputs, Audio inputs Input L, R

2_DTH8005_en 9/03/04 17:20 Page 11

Connections and initial set up

The connections proposed on page 3 permit the rapid connection of your DTH 8005 and ensure optimum sound, visual quality (RGB) and standards. Depending on the sockets available on your other devices or to benefit from the maximum performance of your DTH 8005 you may make other connections.The DTH 8005 has other sockets for this purpose.

1	2	7	3	4
				EN
			6	5

RCA sockets and

cables for analogue

L and R audio

signal.

RCA socket and cable for CVBS Video signal, also called Composite.

Ushiden socket and cable for Y/C Video signal, also called S-Video.

Sockets and cables (inputs)

1 - Audio inputs (INPUT L, R)

The analogue sound of an operating device (television set or amplifier) can be input via the 2 Audio sockets L and R of your DTH 8005. If you do not use the recommended connection, i.e. the Peritel (Scart) socket, you must, as well as the video connections (CVBS or S-VIDEO) connect the outputs Audio L and R of the operating device to the Audio L and R inputs of your

DTH 8005.

Note: the audio sockets and cables are generally identified by a colour code (white for the left channel and red for the right).

2 – Video in - Composite (CVBS) (COMPOSITE VIDEO INPUT)

The yellow video socket also known as composite video (or CVBS): the image quality provided by this socket is less than all the other video sockets. Only use this socket if all the other sockets are already in use.

3 - S-Video input (Y/C) (S-VIDEO IN)

The S-Video signal is of a lesser quality than that of the RGB signal supplied by the Peritel (Scart) socket.The S-Video signal however gives a better image quality than the composite video socket (C) since black and white (Y) are separated from colour in the video signal.

Note: do not forget to connect the audio cables since the S-Video cable transmits only images, not sound.

11