Technicolor - Thomson DTH8005 warranty Programming a recording, Name, Channel, Day s

2_DTH8005_en 9/03/04 17:20 Page 22

Recording functions

Programming a recording

You can record a future programme by programming its recording time. For this you have the choice of manual programming or Naviclick programming, explained on page 24. Open the DVD tray by pressing the OPEN/CLOSE key. Put in a disc with the printed side upwards. Close the tray using the OPEN/CLOSE or PLAY key.

1.From the main menu (MENU key or in Stop mode) select the Timers function with the key or then confirm using the OK key.

•The Timers screen is displayed. It contains a list of all the deferred recordings that you have already programmed, whether carried out manually, as explained below, or using the Naviclick function explained on page 24. If nothing has been programmed the screen simply displays Add Timer.

2.Press the OK key.

•The programming menu is displayed.This menu allows you to define all the parameters necessary for a deferred recording. Select each parameter with the or key and enter the corresponding information with the number keys or the key as described below.

Note: your DTH 8005 can memorise the parameters of 16 different programmings. In the case of double programming, a warning message is displayed.

3.Name

Give a Name to your programme. Press the INFO key to access the keyboard table. Use the keys , , , and OK to compose the title of the recording letter by letter.When complete, select Keep Timer with and press OK.

4.Channel

a)Enter the channel number using the digit keys of the remote control (Pr --must be displayed) or browse the list of channels in the memory of the DTH 8005 using the PR+/PR- key.

b)Or select one of the Audio-Video (AV2,AV3,AV4) sockets to which is connected a device (satellite receiver or other) using the key (the socket details are shown on page 14).

Note: selecting the AV2 connector allows you to program the recording of a satellite reciever programme (either left switched on or also programmed) connected to this connector. The selecting of the AV2 connector is activated by default by the AV Timer function (triggering of programming via the AV connector).

5.Day (s)

Using the digit keys on the remote control type in the date, if the recording is not made the same day, and / or select a period using the key.

Once: to record the selected programme according to the parameters you have defined.

Every Fri: to record the same programme the same day every week starting from today (supposing today is Friday).

Mon-Fri: to record the same programme, everyday at the same time from Monday to Friday.

22