2_DTH8005_en 9/03/04 17:20 Page 19
Recording functions
To watch TV Programmes
1.Turn on your television set.
2.Turn on your DTH 8005 using the STANDBY/ON key.The time displayed on your DTH 8005 is replaced by the word MENU.
•After a few seconds the main menu of the player appears on the television screen.
•Watch TV function is already selected.
Note: turn off non used devices to avoid problems of selecting sockets or other types.
If the main menu of the player is not displayed on the television EN screen, check and/or select the Scart socket to which you
connected your DTH 8005 (see page 3 - AV1 selection). Generally the selection is carried out using the AV key on the television set remote control.
If the THOMSON logo temporarily appears, it is because the screen saver has been triggered ; press the OK button to display the menu
3.Press the OK key of the remote control or one of the
•The images of the last watched channel appear.
•Encrusted within the image is information on the channel and programme.This disappears after several seconds.
Note: when the information banner is displayed at the top of the screen you have the possibility of choosing an audio channel (if this is provided by the channel) using the 
key on the remote control. To display information again, press the INFO key of the remote control.
To change channel
Change the channel with the PR+/PR- key or the remote control number keys.To select the channel of a device connected to your DTH 8005 (satellite reciever) or to view images from a video recorder, use the AV button on the remote control or press the PR+/PR- button several times to select one of the three connectors (AV1, AV2, AV3) to which the device is connected.
Note: where needed, see the connection diagrams on pages 9 and 10.
No. and name of the channel selected on the DTH 8005
Name of the present broadcast, as start 
and end times.
Current time 
(Time set).
Indications concerning the channel sound and the selection of audio channels. Selection is possible with the 
key on the remote control.
Note: NICAM sound is digital, compatible with analogue tv sets. It is broadcast by certain channels and relayed by certain emmiters in some European countries. NICAM (Near Intantaneously Companded Audio Multiplex) is also used to broadcast Dolby Surround stereophonic programmes or for simultaneous broadcasting in two languages or for two different sounds (intended for blind and poorly sighted people).
19
