Recording functions

VPS/PDC

If the channel broadcasts the VPS/PDC signals, activate the VPS/PDC function to start the recording at the time when the programme actually starts.

Recording destinationSelect the disc where the programme will be recorded (DVD R/RW or internal DVR)QualityChoose a recording quality.

Note: selecting the quality enables you to adapt the recording time on the DVD disc. The lower the quality, the longer the time available on the disc. For example, the time available with a clean 4.7 Gb disc with “Low” quality will be approximately 8 hours while in “Best” quality the time will be approximately 60 minutes. The figure 1 à 6 is displayed in the information banner when playing the recording. The quality selection will only be valid for this programming. For an automatic quality selection according to the time remaining on the disc, activate the SmartRecord™ function (page 30).

EN

Store your programming by selecting Keep Timer and confirming.

Return to the main menu using the MENU key in order to continue to use your DVD recorder or turn it off using the STANDBY/ON key, after having loaded a DVD R/RW disc with remaining time compatible with your programming, if DVD R/RW is selected for recording.

Programming a transfer

 

MENU ￿ Timers ￿ OK ￿ Set transfer ￿ OK

Timers

Set transfer

The Timers screen appears. If you didn’t programme anything, the screen displayed only indicated Timers and Set transfer.

1.Select Set transfer and confirm.

The transfer programming menu appears.This menu allows you to define all the parameters necessary for a deferred transfer of the contents of a DVD R/RW disc to the hard disc (DVR).

Note: your DVD recorder can memorise the parameters of 16 different programmings, but only one transfer. In the case of double programming, a warning message is displayed.

2.Select Day(s) then type the date for the transfer.3.Select Start time then type the transfer time.4.Store your programming by selecting Keep Timer and confirm with OK.

13