Connections and initial set up
Basic connections
The connections suggested below are recommended first of all for installing the channels explained later on. By following, the instructions in this page you will avoid any setup problems related to the interaction between several devices. If you have any other audio video devices, do not connect them now; add them after you have installed the channels.
| IN | OUTPUT | COMPONENT |
|
| VIDEO OUT |
| ||
|
|
| Y |
|
|
| VIDEO | Pb/Cb |
|
|
|
| AV 1 (TV) | |
| OUT | L |
|
|
|
| COAXIAL |
|
|
|
| AUDIO | Pr/Cr |
|
|
| R |
|
|
|
|
|
| AV 2 |
ANTENNA |
| DIGITAL |
|
|
/CABLE | HDMI OUT | AUDIO OUT |
|
|
EN
The mains
plug is used to disconnect the appliance from the grid. It should be readily accessible.
United kingdom
Ireland
Europe
AC 230 V
50 Hz
Automatic channel search
To view channels then record TV programmes with this recorder you must first install your region's channels. Installation involves looking for then storing the channels for the different stations that can be received by your aerial. Follow the instructions below to start then continue with the instructions which are displayed on your TV screen.
1.Turn on your TV set.2.Press the recorder’s STANDBY/ON key once.Wait a few seconds until the language menu appears. If this menu is not displayed, after a few seconds on your TV screen select the AV socket to which you connected your recorder.
3.Select a language using the remote control's navigation keys (▼, ▲, OK).The language selection determines the language of the recorder’s menus, but also the language for the dialogues and subtitles on DVD discs if the language selected is also offered by the discs being played.
4.Select the country where you live then the installation method usingthe remote control's navigation keys (▼, ▲, OK).The channel installation starts. Wqit until the end of the channel search and continue the installation by following the indications on the screen and using the ▼, ▲, B, C and OK keys.
Note: Installation with a satellite or cable receiver is explained in the separate “Quick Start Guide” document.
The navigation keys are used to select and confirm the menu functions.The direction of the arrows indicates the way you move around in the.
3