Further information

•You can also change the language while a disc is

playing by pressing the INFO key and selecting

the icon for dialogues or for subtitles. This choice is only valid for the disc if it has not been removed from the disc drawer.

The menus of your DVD recorder do not appear in the language you want

•Check that your language is available in the settings menu. If not, choose another language.

You can’t access the selected menu, even when you press OK

•If the name of the menu appears on a transparent background, it means that the corresponding menu or function is not available.The Disc, Titles and Playlist menus are contextual menus: they depend on operations performed beforehand such as:

•Disc is only accessible if there is a disc in the disc tray of your DVD recorder.

•Titles is only accessible once you have recorded a TV program or video sequence (from an external device).

Your DVD recorder menu disappears

•As with computers, your DVD recorder has a screen saver which replaces the fixed menu by a mobile THOMSON logo. Press on a navigation key to bring back the fixed menu.

You can’t switch channels

•During the recording of a TV program (or video sequence from a connected device), switching channels is impossible.To change channels, you have to stop the recording completely.

In quiet moments, you hear a slight hum coming from your DVD recorder

•Your DVD recorder is equipped with a fan. It switches on as soon as your DVD recorder is turned on and produces a slight hum.

The TV guide (NAVICLICK) is not displayed•Downloading may be disabled. Make sure that Off is not ticked.•Does the channel broadcast a TV guide?Other problemsReconfiguring your player’s initial set-up

•Open the disc tray and make sure there is no disc in it. Close the tray. Hold down the STOP key of your DVD recorder, then press the STANDBY/ON key by holding it down for 3

seconds, until INIT is displayed on the screen of

 

your DVD recorder.The recorder switches off

 

after a few seconds; switch it back on.The

 

menu displayed on screen is the menu which

 

enables you to choose your DVD recorder’s

 

display language. It confirms that all settings

 

made since initial installation have been deleted.

 

The DVD recorder has been reconfigured as it

 

was when purchased (factory settings). Restart

EN

the installation of your DVD recorder.
If you forget your password

•Open the player’s disc tray and ensure that there is no disc on it. Close the tray.The player menu is now displayed on the TV screen. Now press the STOP key on your player and hold the STOP key on the remote control unit down for 3 seconds.The password that you chose for parental control is cancelled.The close padlowk on your recorder’s display disappears.

To erase the hard disc

•Open the player’s disc tray and ensure that there is no disc on it. Close the tray.The player menu is now displayed on the TV screen. Hold down the STOP key on your player and press the DVD REC key for more than 3 seconds.

Some channels or radio stations have numbers above 50 or 80.

•The procedure for installation encrypted channels and radio stations (for which the numbers are not commonly attributed) allocates numbers from 80 for encrypted channels and 50 for radio stations.

Other important information

For your safety

Never open the player or any of its components. It can be dangerous for you or for certain fragile components.You could receive an electric shock or touch the laser beam. Do not place your eyes close to the opening of the disc tray or any other opening to look inside the player.

Disclaimer of warranty!

To the extent allowed by applicable law, representations and warranties of non- infringement of copyrights or other intellectual property rights resulting from the use of this product under conditions other than as specified above, are hereby excluded.

39