Menus

System Options

The System Options menu in the Setup menu offers you settings to configure certain useful functions and optimise the performances of your DVD recorder to match those of the devices connected to it.

MENU ￿ Setup ￿ OK ￿ System Options ￿ OK
DivX

Selecting DivX displays the authorisation number for the videos you have purchased over the Internet (VOD:Video On Demand).

Digital output (audio)

Depending on the amplifier or television (with or without integrated decoder) connected to your DVD recorder, you will need to set the DIGITAL AUDIO OUT sockets (coaxial) so that they deliver the Dolby Digital, DTS or MPEG digital signals supported by the other device.Tick Dolby Digital or DTS if the amplifier or TV set has a Dolby Digital or DTS decoder (or both, depending on devices). MPEG must be ticked to play a DVD disc on which the sound was recorded using MPEG standard.

Standby mode

Your DVD recorder has an Eco Standby to reduce its power consumption when on stand-by. Select Eco. Standby to enable this function.

Note: the Eco function does not allow the display of programming warning messages on the display panel. Only the record icon will flash.

Settings

Information relating to TV programmes in the Naviclick guide is transmitted by certain channels.

Update

Programmes are updated at 3am or 8am.

MENU ￿ Setup ￿ OK ￿ Installation ￿ OK ￿ Naviclick

The line Update Time is already selected, press OK.

Select 3 am or 8 am and confirm.

Note: For those countries offering the NexTView service we recommend that you set the downloading time to 3am. For all other countries set it to 8am.

34