Technicolor - Thomson MULTIMEDIA MONITOR user manual Setting UP the Monitor, FIRST-TIME Setup

CONNECTIONS & SETUP

SETTING UP THE MONITOR

Follow these steps when setting up the monitor for the first time.

STEP 1: PLUG IN THE MONITOR

Plug the end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely.

STEP 2: PLACE BATTERIES IN REMOTE

•Remove the battery compartment cover from the back of the remote by pushing down on and sliding off the cover.

•Insert fresh batteries. Make sure that the polarities (+ and -) are aligned correctly.

•Replace the cover.

STEP 3: TURN ON THE MONITOR

Press TV on the remote, or press POWER on the monitor’s front panel.

Pressing the TV button not only turns on the monitor, but puts the remote into TV mode, so that the buttons on the remote will control monitor functions.

STEP 4: SET UP THE MONITOR

The information that follows gives you step by step instructions for the first time set up of your monitor. Take time now to read the next section, “Setting Up Your Monitor,” and complete the set up routine.

FIRST-TIME SETUP

The first-time setup of your monitor includes: setting the time, auto channel search, setting up the auto tuning feature, and labeling the channels and inputs. Refer to this section if you ever need to reset any of these initial settings.

VCR1 ONOFF TV

DVD	VCR2 AUX DIRECTV￿
MUTE	SKIP
	CH +
L	V
O
	O
V
	L
	CH -
FETCH	GO BACK

GUIDEINFO

OK

MENUCLEAR

TV button

18