CONNECTIONS & SETUP
LABEL THE CHANNELS
This last step in the setup routine lets you create your channel list and label your channels.
1. From the Channel menu (shown below), select Lists and Labels.
CHANNEL
1 Signal Type
2 Auto Channel Search
3 List and Labels
4Autotuning
0 Go Back
The Lists and Labels menu appears (shown below).
LIST AND LABELS
Channel | Channel | Channel | |
Number | List | Label | |
59 |
| Yes | |
|
|
|
|
Use ^ or v, keypad, or CH ^/v to set channel, MENU to exit.
2.Use the left and right arrows to point to the three different areas of the control panel (called “fields”).
3.Use the up and down arrows to scroll through the numbers (or use the digit keys on the remote) and letters and select Yes or No in the Channel List field. You may wish to refer to the call letters listed in your newspaper’s TV section for ideas on labelling the channels.
4.Repeat this process for each of your channels. Then press MENU or OK to continue. The monitor can store in memory as many as 45 labels.
WHAT NOW?
Now that you’ve finished the setup, you can sit back, relax, and enjoy the monitor, or you can take a few minutes to program the remote to control your VCR, DVD player, satellite receiver, or other components. To find out how to program the remote, go to the next section.
Use the CH ^ (channel up) or CH v (channel down) buttons to change channels in the Channel Number field. This works even if you’re not in the Channel Number field. Or, enter the channel number directly using the number buttons on the universal remote. To enter a number greater than 99, press and hold “1” to enter the hundreds digit, then press the two remaining numbers.
The list and labels feature can also be accessed from the Channel menu. Because this procedure can be time consuming, feel free to skip this step and come back to it later.
25
