Before You Begin
Before You Begin
EN Important Battery
Information
•When storing the unit , be sure to remove the batteries because they may leak and damage the unit.
•Batteries may leak electrolyte if inserted incorrectly, if disposed of in fire, or if an attempt is made to charge a battery not intended to be recharged.
•Never mix new batteries with old ones. Do not mix battery types.
•Discard leaky batteries immediately. Leaking batteries may cause skin burns or other personal injury.
•Do not charge batteries which are not intended to be recharged.
•Dispose of batteries, according to federal, state and local regulations.
Please Respect the
Environment!
Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling.
Headset Safety
Have a Blast- Just Not in Your Eardrums Make sure you turn down
the volume on the unit
before you put on
headphones. Increase the volume to the desired level only after headphone are in place.
•Do not play your headset at a high volume. Hearing experts warn against extended
•If you experience a ringing in your ears, reduce volume or discontinue use.
•You should use extreme caution or temporarily discontinue use in potentially hazardous situations. Even if your headset is an
Insert battery into the player
1.To remove the battery door, use a coin to turn the screw to unlock the battery compartment.
2.Lift up the battery compartment.
3.Insert a “AA”(UM3) battery with polarities corresponding to the indications on the compartment. (Refer to “Before You Begin” for important battery information.)
4.Place the battery compartment to the original position, lock the compartment with the screw.
EN
Note
Refer to the power level indicator on display for battery level.
Replace with new batteries when the indicator is empty. Refer to “Display Overview” on page 11.
5 |
|
|
| 6 |
