REMOTE | R.D.S. |
|
SENSOR | COMPACT | |
POWER / |
|
|
ECO |
| DIGITAL AUDIO |
TUNER |
| |
|
| |
| DISPLAY |
|
TIMER |
|
| TIMER | R.D.S |
PROG. |
|
|
|
|
CD / CASSETTE / RADIO MICRO SYSTEM |
|
| ||
P R E S E T E Q U A L I Z E R S O U N D C O N T R O L |
|
| ||
REMAIN |
| BAND | VOLUME |
|
C D | TA PE | TU N ER |
|
|
PLAY / PAUSE | STOP | TUNING/ SKIP / SEARCH |
TIME |
| PRESET EQ |
PHONES
MIX | PRESET | INTRO | MONO STEREO |
|
|
| BEAT CUT 1 2 |
RS1290 | AM1150/AM1155 |
|
Loading and Playing CDs | Setting Intro Play |
1.Push lightly to open the CD door. Load a CD (with labelled side facing up) into the CD compartment. Then, close the door by pushing it down lightly.
2.Press CD to select CD mode and the power will be turned on automatically.
3.Press PLAY/PAUSE to play. You may:
•skip to other tracks by pressing TUNING/ SKIP/SEARCH.
•press REPEAT 1/ALL once to play a particular track repeatedly. REPEAT is shown in the display simultaneously. Press REPEAT 1/ALL again to play all tracks repeatedly, at the same time, REPEAT is flashing in the display. Press REPEAT 1/ALL third time to
•listen the tracks randomly by pressing
SHUFFLE/MIX.
4.Press STOP to stop playback.
Tip: If the CD compartment is not loaded with a CD or the CD is unreadable, the message ÒNO DISCÓ will be shown.
Intro Play let you enjoy the CD tracks for 10 seconds. When the last track has played for 10 seconds, the Intro Play stops.
1.Follow step 1 and 2 of “Loading and Playing CDs” above.
2.Press INTRO and the INTRO icon will be shown.
3.Press PLAY to start playback form the first track. You may press TUNING/SKIP/SEARCH to select a particular track.
4.Press INTRO again to exit intro play.
Programming
1.Select CD mode by pressing CD.
2.Press PROG after the CD has been loaded into the system. The message “00 PRO 1” will be shown on the display.
3.Press TUNING/SKIP/SEARCH to select a track to be stored into memory location 1.
4.Press PROG to confirm your selection and store that track into memory. Repeat step 3 and this step until you have stored enough tracks or 32 tracks into memory. PROGRAM keeps flashing when you are setting the program.
5.Press PLAY/PAUSE to run the preset program. When the unit is playing the program, PROGRAM is shown instead of flashing.
6.Press STOP or open the CD compartment door to clean the stored program.
7
