Technicolor - Thomson TV/DVD Combo manual Initial set-up, Deleting a channel, Changing the name

TV_DVD_LCD_en 17/06/02 11:45 Page 6

Initial set-up

The initial set-up consists in carrying out all the necessary settings to search and store all the channels you can receive in your area. Make sure that the TV/DVD is switched on and follow steps 1 to 6 on this page.

When you first switch the TV/DVD on, the language selection menu appears.

If this does not happen, refer to Manual channel set-up section to find out how to carry out an Autosearch.

1Choose which language you want the menus to appear in using the

or button.

2Confirm with ok.A list of countries appears, over two pages.

3Select the relevant country using the or button.

This is the country you are in, or the country whose channels you want to receive if you live near its borders.

4Confirm with ok.A welcoming message appears.

5Start automatic set-up by pressing ok.

The menu that appears tells you how set-up is progressing. Wait for the end of set-up message before leaving the menu, otherwise the channels will not all be memorised. Depending on the number of channels you want to receive, auto set-up can take up to 10 minutes.

To order, name and rename channels or delete channels stored twice, press ok and go to step 6.

OR

If you do not want to reorganise the channels, press exit to close the menu.

6The PROGRAMME ORGANISATION menu allows you to name channels, change the sequence of channels and delete channels stored twice or with poor reception quality.

Follow the instructions on the screen. Use aTV programme magazine to identify the various channels.

•Organising your channels: Select the Select program. line.

Look for the channel that you want to assign the number 1 to with the pr + and pr - or and buttons using the channel logos to help you.The number already assigned appears on the Select program. line.

Select the Swap with PR line, key in 01 and press ok.The channel goes to first position: the two channels are swapped.

Repeat this procedure for the other channels.

•Deleting a channel:

Select the Select program. line and scroll through the channels using the pr + and pr - or and buttons.

When you come to a channel to be deleted, select Delete program., and press ok.

Confirm by pressing again ok button.

•Changing the name:

Select the Change pr. name line and choose the character to be altered with the and buttons.

Scroll through the alphabet using the 1 and 2 buttons.

The name will be changed when you change line or leave the menu. When you have finished, press exit to close the menu.

You may subsequently return to this menu by selecting the Programme Organisation line in the INSTALLATION SUMMARY menu.

More info

Missing channels: channels are searched for according to the	Decoder: if you have connected a decoder to the AV1
country selected, refer to the Manual channel set-upchapter for	socket, after the initial set-up you should display the MANUAL
information on how to set up channels that have not been found.	INSTALLATION menu and confirm the Decoder option.

6