Technicolor - Thomson TV/DVD Combo General operation, Switching the TV/DVD set on and off, Volume

TV_DVD_LCD_en 17/06/02 11:45 Page 8

General operation

This page describe the basic features of your TV/DVD with LCD screen.

Switching the TV/DVD set on and off

To switch the TV/DVD set on, press the B button on the keyboard.When the set is on, the indicator on the front is green.

Standby mode: press the B button on the keyboard or on the remote control.When the TV/DVD set is in standby mode, the indicator on the front is red.

The TV/DVD set remains powered up, but with low energy consumption.

To switch on from standby, you can:

-press any numeric button on the remote control,

-press the ok or pr+/pr-,

-press the av.

Automatic switch off: the set automatically switch in standby mode 5 minutes after the station being watched stop broadcasting.

Volume

Volume control: use the buttons to increase and decrease the volume.

Sound mute (): press this button to temporarily mute the sound.

Press again to restore it.

Displaying status information

Press the yellow info button on the remote control to display the number and name of the channel you are watching, the time, and the type of sound.

The number and name of the channel are displayed whenever you turn on the TV/DVD set or change channels.

The channel number will be displayed permanently if you have activated the function in the

Preferences menu (cf. page 11).

Accessing programmes

- Using the numeric buttons: for programmes 1 to 9, press the corresponding button. For two-digit programmes, first press the 0/--button, then the programme number (e.g. type 012 for channel 12).

- Using the pr+/pr- buttons: scan through the programmes.You cannot access AV programmes but these are accessible using the pr+/pr- buttons on the TV/DVD set. - Using the list of programmes: see page 9.

Accessing AV programmes

Press the av button to display the last selected AV programme, press again to access the other AV programmes.

You can also access AV programmes using the list of programmes (see page 9).

More info

Child lock

You can disable the TV/DVD buttons so that your children cannot switch the television on without your permission.The TV/DVD set can then only be switched on using the remote control.This function is activated:

•after the sleep timer has been set.

•if a wake-up time has been set (TIME menu).

•if you put theTV/DVD into Standby mode by pressing the standby button

Bon the remote control for 5 seconds.

When the TV/DVD set is in standby and locked, the indicator on the front panel flashes red.

Picture and sound preset

Display the menu using the red button. Select the desired option using the / buttons and adjust as required.

8