A D D I T I O NAL
i n f o r m a t i o n s
Auto LongPlay
The video recorder has an Auto LongPlay function. If you have programmed a recording which exeeds the recording time remaining on the tape, the video recorder automatically transfers to Long Play mode (LP).
ShowView
If ShowView programming does not operate correctly, it may be because the video recorder clock is not set correctly.
If the time is correctly set, check and correct if necessary the ShowView numbers assigned to the various channels.
Press buttons MENU, 2 ,3 one after the other to display the menu on the right:
Some television programme guides give the numbers corresponding to the channels. Follow the screen instructions to check and change the ShowView numbers.
CHAINE | SHOWVIEW | ||
Pr | 3 | 155 |
|
> Pr | 4 | 123 | < |
Pr 12 | 101 |
| |
-/ + DEFILER 0000 ANNULER E SORTIE
Some cable or satellite channels share a transmission channel. To
programme ShowView successfully for these channels, each channel has to be set up with a different Pr number and must also have a different ShowView number.
Refer to the «Manual Channel Setup» chapter of the Getting Started guide to modify the channel numbers if necessary.
ShowView and the satellite demodulator
If you programme the recording, using ShowView codes, of a programme broadcast by satellite, the ShowView programmer can ask you to confirm the channel number (Pr99).
Connection by the aerial cable - During the automatic channel
Connection by the AUDIO/VIDEO 1 or 2 socket - If your satellite receiver is connected to the video recorder by the audio video socket, do not choose a number but select the AV1 or AV2 socket.
ShowView is a registered trademark of Gemstar Development Corporation. | 17 |
The ShowView system is manufactured under licence from Gemstar Development Corporation. |
