AM loop antenna J.cl.ded)
This antenna is normally sufficient for reception of AM broad- casts.
AM loop antenna
(included)
AM outdoor antenna (noti.eJ.d )
The outdoor antenna should be used when using the main unit in mountainous areas or in spaces enclosed by reinforced concrete where the AM loop antenna (included) does not provide satisfac- tory reception.
AM outdoor antenna
(not included)
AM ANT
AM LOOPANT
L.,.J
(not included)
AM AI_
AM LOOPANT
AM loop antenna (included)
Install the AM antenna holder (included) at the rear panel of this unit and then attach the AM loop antenna to the AM antenna holder.
Insert the tab into the hole and then
push the holder
Rear
of this unit
AM antenna holder (included)
Pay attention to the following points when mounting the antenna.
•Do not mount it horizontally (Doing so will impair reception).
•Do not mount it close to power cords, speaker wires or metal surfaces (Doing so will result in noise).
•Do not mount it close to a tape deck. When the tape deck is be- ing used, chirping or beeping sounds may result.
When mounting the antenna to a column, a wall or rack
antenna holder
(included)
Screw (included)
Use 5- 12 m
When the unit is not in use, disconnect the outdoor antenna to prevent possible damage that may be caused by lightning. Never use an outdoor antenna during an electrical storm.
Be sure to connect the AM loop antenna even when an outdoor antenna is used.
8
