Technics SL-PD947 Direct Access Play, G g,,,-0, From the main unit, Operating Procedure on page

Direct Access Play

Direct access play involves starting play from a specific track on a specific disc and playing all discs on the five-disc tray in sequence.

f

G g®,,,-0,

/

From the main unit

r1

_s

©

,/

Before operation, follow the steps 1 -4 of "Basic

Operating Procedure" on page 9.

If you want to start with the disc at the playing position, proceed to

step 2.

1 Press the desired disc button (1 -5).

For example: To select disc 1, press the r'_ button.

The selected disc indicator will flash.

I

.... I_ DISC _

If the disc only is selected, play will begin its first track in about ten seconds.

If a disc is not on the selected disc tray, the changer plays the disc at the next number.

To select a track between 1 and 10:

Press the corresponding number on the keypad.

To select a two-digit track number over 10:

Press the >10 button then one of the buttons from 0-9 to select the "tens" digit. Then press one of the buttons from 0 to 9 to select the "unit" digit.

For example;

To select track number 20: Press > 10, then 2, and then O.

Play begins at the track selected and continues through the end of the last disc.

The changer will stop automatically when the last track on the last disc finishes playing.

If you play a disc with the loading drawer open, the changer will stop when the last track on the current disc finishes playing.

2 Press the numeric button(s) to select the track.

	Track		number
'_''{"_''2"(3)'('4"_'5"1_T_C'' I				I_l. ll_--llI--I"I [I
- - -	_ DISC	_	K	MIN	SEC

12