Technics SL-PD947 Special Features ,o,,n, Pitch control function, To play Standard pitch

Special Features ,°o°,,n..°,

_) ] Pitch control

I "_*i..... I I 'I ' I ' I ' I ' I

L__I

r--i

©

S

Pitch control function

The playback pitch can be changed as desired within a range of +12.5%. (The tempo and the pitch of the sound will change simultaneously.)

1 Press OFFION

The pitch control indicator will illuminate.

t_

LTurn the knob in the "+" or "-"direction.

The pitch will change while the knob is being held, and the changed values will show on the display.

+: Pitch increases

-: Pitch decreases

I _1 )' "2:_" _:"3: "4" "5"°_; / I'tL /'_" /=_7I I

I

Pitch display

if the knob is released, the pitch will stop changing, and after approximately 2 seconds the pitch display will change back to the time display.

Pitch changing steps

The +5.9% position is a half tone sharp ( _ ).

The -5.6% position is a half tone flat ( _ ).

The pitch can be adjusted by turning the knob even if the pitch con- trol indicator is switched off. The playback sound will not change if this is done. To play back at the setting pitch, press OFF/ON to make the pitch control indicator illuminate.

Fine adjustment is possible by turning the knob and then im- mediately turning it back to the original position. In this case, the pitch will change by 0.1% only.

While changing the pitch, the time display will show the playback position only. This will not match the actual playback time.

To play in the	0%	standard pitch
Press OFFION to	switch	off the pitch control in-	Even	after the pitch control	indicator has been switched	off, the
dicator.			pitch	setting will remain in	memory as long as the power	of the
			changer is not turned off.

OFF/ON

%

26