Technics SL-PD947 Program Play ,oon, From the remote control, Operating Procedure on page, Press

Program Play ,oon,,°..°,

'\

2 %

3

From the remote control

Before operation, follow the steps 1 -4 of "Basic

Operating Procedure" on page 9.

In the stop mode, press PROGRAM MODE to Illuminate the program play indicator.

Skip to step 4 if the disc number display shows the desired disc number.

				Disc	number	display
				5	I
1	2	3	4		i	17	m	}
P_		. .	°		DISCI	L../_= .=.u		J
2 Press	DISC.

3 Press the numeric button (1 -5) to specify the disc number.

Skip to step 5 if you want to enter only the disc number.

1 2 3 4 5

(DO(_ OO

r5Repeat steps i

3 and 4 as desired.

5 Repeat steps 2, 3 and 4 until you have com. pleted the desired entry.

If you enter non-existing disc(s) or track(s) soon after the loading drawer is closed or when it is open, the corresponding indicator illuminates and the entry is included in the count. In the play mode, the changer will cancel the non-existing entry and play the subsequent programmed disc or track.

If you attempt a 33rd selection, the -F (full) indication will

be displayed.

6 Press PLAY to start play.

To enter additional selections during play, repeat steps 2, 3 and 4.

4 Press the numeric button(s) to specify the track number.

For example: To select track number 20, press > 10, then 2, and then O.

Play the changer with the loading drawer closed.

While the loading drawer is open, if next programmed selection is in one of the other discs, the changer will stop after the current track finishes playing.

16