Technics WX-H3050 Communications with Customers TALK, When the Press-To-TalkPTT mode is pre- set

■Communications with Customers [TALK]

Any store personnel wearing the headset can communicate bidirectionally with any customer who is at the menu board.

1.Select a proper sound level by pressing the ! or @ but- ton.

2.You will hear a beep in the headset when a vehicle arrives at the menu board.

<When the Press-To-Talk (PTT) mode is pre- set>

1.Hold down the T1 button and speak to the customer. A short beep is heard in the headset.

Hold down

2.Release the button. Your voice is not heard by the cus- tomer.

Release

<When the Talk-Lock mode is preset>

1.Press the T1 button and speak to the customer. A short beep is heard in the headset.

Press

2.Press the button again. The lock is released, and your voice is not be heard by the customer.

Press again

■Communications with Other Store Personnel [PAGE]

Store personnel wearing the headset can communicate with each other without being heard by customers.

<When the Press-To-Page (PTP) mode is pre- set>

1.Hold down the P button and speak into the microphone at a normal level.

Hold down

2.Release the button. Your voice will not be heard by the other store personnel.

Release

<When the Page-Lock mode is preset>

1.Press the P button and speak into the microphone at a normal level.

Press

2.Press the P button again. The lock will be released, and your voice will not be heard by the other store person- nel.

Press again

Note: A maximum of 4 operators can have a conversation at the same time.

11