Technics WX-H3050 manual Setup Procedures, Opening the Switch Compartment, DIP Switch Setup, 1 2 3

Setup Procedures

Caution: Setup of this product should only be performed by qualified service personnel or system installers.

■Opening the Switch Compartment

1.Press the power button for 2 seconds or more to turn off the headset.

2.Unscrew the screw and open the switch compartment.

3.Set the switches as described below.

4.After finishing the setup, replace the cover.

5.Turn on the headset.

■DIP Switch Setup

An eight-bit DIP switch is provided for system setups. The initial setting is marked with an asterisk *.

Note: Be sure to turn off the headset in Step 1. Otherwise, the DIP Switch will not be activated until you turn the power off and on again.

	ON
	OFF	1 2 3 4 5 6 7 8		Initial Setting
SW#	Function		ON		OFF
1	Auto TALK Lock ON/OFF		ON		OFF*
2	Auto TALK Lock LANE		B		A*
3	T2 Button Setting		Direct Lane Select		Normal*
4	Talk Lock/Press-To-Talk		TALK Lock		PTT*
5	Page Lock/Press-To-Page		PAGE Lock		PTP*

6Voice Prompt Language Select

7Voice Prompt Language Select

8 RF Power Reduce Power Full Power*

1.Press the power button for 2 seconds or more to turn off the headset. headset.

2.Set the switches as follows.

SW#1: This switch selects Auto Talk Lock ON/OFF ON: Auto Talk Lock ON

OFF: Auto Talk Lock OFF

SW#2: This switch selects the target lane for "SW#1: Auto Talk Lock".

ON: Lane B

OFF: Lane A

SW#3: This switch selects Direct Lane Select Mode or Normal.

ON: Direct Lane Select Mode

When double-drive-thru, the T1 button is for lane A, the T2 button is for lane B.

OFF: Normal

For double-drive-thru, the T2 button is A/B Lane Selection.

SW#4: This switch selects Talk Lock or Press-To-Talk ON: Talk Lock

OFF: PTT (Press-To-Talk)

SW#5: This switch selects Page Lock or Press-To-Page.

ON: PAGE Lock

OFF: PTP (Press-To-Page)

SW#6, SW#7: This switch selects language of Voice Prompt.

SW#6	SW#7	Language
OFF*	OFF*	English
OFF	ON	Spanish
ON	OFF	French
ON	ON	Voice Prompt OFF

16