SELECTING DAB RADIO OPERATION
To select DAB radio operation:
•Touch the FUNCTION touchpad (or press the FUNCTION button on the remote control) repeatedly until ‘DAB’is displayed.
After a few seconds, the radio will tune to the
INITIAL DAB RADIO SCAN
When DAB radio is used for the first time:
The system scans all usable stations (full scan) and stores them alphanumerically
The initial scan will take a few minutes and a progress bar will be displayed with the number of services found.
After the scan, the clock will be set, the radio will display the first station in the sequence and begin playing at the default system volume of 13.
Note: If no stations are found after the scan, it may be that the
Number of services foundsignal in your current location is too weak. If this happens, switch the radio off and move it to a location with a stronger signal. Repeat the scan process in the new location.
The stations found will be stored in an alphanumeric list.
TO SELECT ANOTHER STATION
•Press the { or } button to browse the list of stations on the display.•When you find the station name you want to listen to, press the ENTER button.To change to the FM band
•Touch the FUNCTION touchpad (or press the FUNCTION button on the remote control) repeatedly until ‘FM’ is
displayed.To manually tune to FM stations
•Press the { or } button repeatedly to tune down or up the band one frequency step at a time.
To auto-tune to FM stations
•Press the /,/SCAN button to tune to the next station in the band.•To change the sweep direction, press the { button (to tune down) or }button (to tune up) before pressing the /,/SCAN button.
Tuning will stop automatically when the station is reached.
DAB and FM presets
Your radio can store up to 10 of your favourite stations as presets (numbers
To store a preset
•Tune to the station you want to store as a preset.
•From the remote control, press and hold the NUMBER
The display will confirm that the station has been stored in this preset number.
To recall a preset
•Press the NUMBER
8