loading discs
To select CD operation:
•Touch the FUNCTION touchpad (or press the FUNCTION button on the remote control) repeatedly until ‘CD’is displayed.
Loading a disc:
•Press the OPEN/CLOSE area at the front corner of the disc lid on top of the unit.
The lid will open slowly.•Gently place a disc on the centre spindle with the label side upward.•Once in place, press the centre of the disc until it clicks into place on the turntable.
•Close the lid and press the OPEN/CLOSE area until it latches shut.After a few seconds the disc will read and the disc data will be displayed.ESP EnabledTotal number | Total play |
of tracks on | time |
the CD |
|
Unloading a disc:
•If the disc is playing, press the STOP/. button and wait a few seconds for the disc to stop.
•Press the OPEN/CLOSE area at the front of the CD lid. The lid will open slowly.
Grip the disc at the sides and lift it out of the disc compartment.CD PLAYBACK, PAUSE:
•Load the CD.•Press the /,/SCAN button to start the CD playing.•When a CD is playing, pressing the /,/SCAN button at any time will pause playback. Press the button again to
Selecting tracks:
•Press the { or } button briefly to select the previous or next track from the disc.
NOTE: The first press of the { button will replay the current track.Direct access track selection:
•Press a number button to select a track number (or two numbers if the number is greater than 9).
•Press the /,/SCAN button to skip to your chosen track.
Fast search:
•To fast search through a track, press and hold the { or } button.The player will fast search through the track at high speed in the chosen direction until the button is released.
REPEAT AND SHUFFLE FUNCTIONS
You can repeat a single track, the whole disc or select shuffle to play the tracks in a random sequence.
To set a repeat or shuffle mode:
•Press the PLAY MODE button on the remote control to cycle through the options of ‘Repeat 1’ (repeat current track), ‘Repeat All’ (Repeat the disc) or Shuffle (play tracks in a random sequence).
The Repeat, Repeat All or Shuffle symbol will be displayed.
ESP SYSTEM
The ESP system is an
To toggle ESP on or off:
•Press the INFO/ESP/DISPLAY button when playing a CD.The ESP legend will be displayed when ESP is switched on.
11