Track
number
PROGRAMMING TRACKS FROM A CD

cd programming

When playing a CD, you can store a random sequence of up to 64 tracks to play in your preferred order.

Program entry takes place when the disc is stopped.

STORING A PROGRAM

To store a CD program:

•Load the disc you want to play, wait for the disc to read.

•Touch the MEMORY/CLOCK touchpad on the front panel or press the CLOCK ADJ./PROGRAM button on the

remote control.

The Program Entry display will appear, prompting for the first track number to program (P-01).

Program position

•Press the {or } button to select the track number for the first track you want to program.

•Touch the MEMORY/CLOCK touchpad on the front panel or press the CLOCK ADJ./PROGRAM button on the remote control to store this track into the program memory.

The track will be stored and the program counter will increase to P-02.

•Repeat the above two steps to store the next and subsequent tracks in your program sequence.

Playing the program

•When you have finished entering all tracks in your program, press the /,/SCAN button to start the program playing.

Navigating the programmed tracks:

When the program is playing, the play and pause buttons work as normal and you can skip between tracks in the program by pressing the { or } button.

Clearing a program

•If the CD is playing, press the STOP/. button to stop the disc.•Once the disc has stoppped, press the STOP/. button again.The Program will clear from memory.NOTE: Opening the disc loading door will also clear the program.

Repeat function

•When a program is stored you can set a repeat mode in the normal way if required.

12