DAB SCANNING
DAB ADVANCED OPERATION

When first used, your audio system scanned the DAB band for available stations. The station services found were then stored in your system’s memory.

You can re-scan the band at any time if you move to a different area or just to refresh the stored list of available stations.

TO START A FULL SCAN

•Select the DAB band.•Press the /,/SCAN button to start a scan.

The unit will now display the legend ‘SCANNING’ and a bargraph to show scan progress. The number of services found during the scan will be shown at the right side of the display.

After running a scan the radio will re-tune to the last tuned station, or if this is not available, the first station found in alphabetical sequence.

The DAB radio of your audio system includes several advanced features.

To select the advanced features:

•Touch the MENU touchpad on the front panel (or press the MENU button on the on the remote control) to open the advanced operation menu.

•To scroll through the menu options below, press the { or } button.

•To select a menu option, press the ENTER button.

MANUAL TUNE

Manual tuning may be used to tune the band by frequency or multiplex. A station multiplex may then be selected and displayed with a signal strength bargraph to assist with aligning the aerial for best signal.

To tune manually:

•Select Manual Tune from the menu.•Press the {or }button to scroll through the multiplex numbers and frequencies.
•To select a multiplex, press the ENTER button.

The selected multiplex number will be displayed with (if present) the multiplex name and signal strength.

•Press the { or } button to re-tune to another multiplex.

FULL SCAN

You can start a local or full scan by selecting these menu options. This is an alternative method of starting a scan to that described in the SCANNING section on this page.

DRC VALUE

DRC is Dynamic Range Compression. Enabling DRC may improve the sound of DAB radio when listening in a noisy room. You can set the DRC value with this menu option.

•Select DRC from the menu.

•Press the { or } button to select the DRC value you prefer from the options of Off, high or low.

•Press the ENTER button to confirm your selection. PRUNE: If your station list includes stations that you can no longer receive (you may have moved to a different area), you can select the ‘Prune’ option to remove any stations that can no longer be received from the Station List.

SYSTEM

If you choose this option, the radio’s software version is displayed. This is purely an aid for technicians should your radio ever need service.

10