PROGRAM PLAY OF MP3/WMA FILES STORED ON A DISC OR USB DRIVE

STORING A MP3/WMA PROGRAM

Some MP3/WMA compliations will be arranged with all tracks in the ‘root’ folder of the disc/drive, others will be arranged within a set of folders (usually the music albums). The same sequence is used for both types of track storage.

To store a MP3/WMA program:

•Load the disc/drive you want to play, and wait for it to read.

•Touch the MEMORY/CLOCK touchpad on the front panel or press the CLOCK ADJ./PROGRAM button on the remote control.

The Program Entry display will appear, prompting for the first folder, then track number to program (P-01).

Program Folder Track position number number

•Press the { or } button to select the folder number for the first track you want to program.

NOTE: If all tracks are arranged in the ‘root’ directory of the disc, only ‘Folder 1’ (01) will be selectable at this stage.

•Touch the MEMORY/CLOCK touchpad on the front panel or press the CLOCK ADJ./PROGRAM button on the remote control to select this folder.

•Press the { or } button to select the track number within this folder for the first track you want to program.

•Touch the MEMORY/CLOCK touchpad on the front panel or press the CLOCK ADJ./PROGRAM button on the remote control to store this track into the memory.

The track will be stored and the program counter will increase to P-02.

•Repeat the previous four steps to store the next and subsequent tracks in your program sequence.

Playing the program

•When you have finished entering all tracks in your program, press the /,/SCAN button to start the program playing.

Clearing a program

•If the CD is playing, press the STOP/. button to stop the disc.

•Once the disc has stopped, press the STOP/. button again.

The Program will clear from memory.

NOTE: Opening the disc loading door will also clear the program.

Navigating the programmed tracks:

When the program is playing, the play and pause buttons work as normal and you can skip between tracks in the program by pressing the { or } buttons.

Repeat function

•When a program is stored you can set Repeat 1 or Repeat All mode in the normal way if required.

15