Your system includes a timer that enables you to set times for the system to switch on and switch off automatically.
To set the timer:
•Press the TIMER button on the remote control to step through each stage in timer setting, shown in the sequence below.
•To make changes to a setting, press the { or } button.•Press the TIMER button to confirm each setting and move on to set the next.Activating the timer:
When timer setting is complete, the timer can be switched on or off by pressing the TIMER button.
The Timer symbol shows on the display when the timer is activated.THE SLEEP FUNCTION
The Sleep function allows you to program your system to switch itself off after a set period in 10 minute steps from 90 minutes down to 10 minutes.
To activate the Sleep function:
•Press the SLEEP button. The display will show Sleep 90.
•Now press the SLEEP button repeatedly until your required sleep time (in minutes) appears on the display.
When sleep mode is set, the sleep symbol will appear on the display to confirm that sleep mode is set.
Sleep symbolYour system will continue to play, then will set to Standby when the sleep time expires.
To check the Sleep time remaining:
•Press the SLEEP button during Sleep mode.The Sleep time remaining will be shown on the display.
To cancel the Sleep function:
•Press the SLEEP button repeatedly until the sleep symbol disappears, or set the unit to Standby..
DAB is a terrestrial system and frequencies in different areas vary. If you move the radio to another part of the country performing a Full Scan may not be enough to re program the radio you may need to reset the radio.
To restore the factory settings:
•Set the system to DAB mode.•Press and hold the MEMORY/CLOCK button on the front panel until the display flashes ‘Factory Reset’.
•Press the /,/SCAN button to confirm factory reset. The unit will now scan for DAB broadcast stations in your area.
After reset the settings are returned to the factory defaults and all the presets are erased.
19