CAUTION: the safety precautions are part of the appliance. EN Read them carefully before using your new appliance for the
first time. Keep them in a place where you can find and refer to them later on.
DESCRIPTION
APusher
BFeed tube
CCover
DSieve
EJuice collector
FPouring spout with drip-stop system
GPulp collector
HSafety clamp
IControl switch (2 speeds)
JDrive shaft
KMotor unit
LJuice jug cover
MFoam separator
NJuice jug
OBrush
PCord storage
SAFETY SYSTEM
This appliance is fitted with a safety mechanism. To start the juice machine, the cover (C) must be properly secured by the safety clamp (H). Opening the safety clamp (H) will stop the juice machine. At the end of a cycle, place the control switch (I) to 0 and wait until the sieve (D) stops completely before removing the cover.
BEFORE FIRST USE
•We recommend that you wash all the removable parts (A, B,C, D, E, G, L, M, N) in warm soapy water (see paragraph ”Cleaning”). Rinse and dry them carefully.
•Unpack the appliance and place it on a solid, stable work surface.
•Ensure that all packaging has been removed before starting the appliance.
USING THE APPLIANCE
•Fit the juice collector (E) in the appliance, tipping it slightly forward to pass the pouring spout through the hole provided (see Fig. 1).
•Place the sieve (D) in the juice collector (E). Ensure that the sieve is properly clipped onto the drive shaft (J).You can hear an audible click when the sieve is positioned correctly (see Fig. 2).
•Fit the cover (C) on the appliance, ejection spout to the rear (see Fig. 3).
53