Tefal KO120110 manual Description, Before First USE, Unwind the power cord completely fig

Models: KO120110

1 124
Download 124 pages 59 Kb
Page 22
Image 22

Only plug in your kettle to a mains socket with an earth pin, or to an electrical extension with an earth pin. Check that the supply voltage indicated on the rating plate of the appliance matches that of the system. The use of multi-plug adapter is not recommended.

Never use the kettle when your hands or feet are wet.

Place the kettle and its power cord well to the back of the work surface.

Unplug it from the mains socket immediately if you notice any anomalies during operation.

Do not pull on the power cord to unplug the appliance.

Do not let the power cord dangle over the edge of a table or work top in order to avoid risks of the kettle falling.

Always remain vigilant when the appliance is on, and in particular be careful of the steam coming out of the spout which is very hot.

Do not touch the filter or the lid when the water is boiling.

Do not move the kettle when it is operating.

Our warranty does not cover kettles which no longer operate or operate incorrectly due to a lack of descaling.

Protect the appliance from humidity and frost.

Keep the kettle and its power cord away from any source of heat, from any wet or slippery surface

and away from sharp edges.

Never use the appliance in a bathroom or close to a water source.

All of our appliances are subjected to strict quality checks. Operating checks are carried out randomly on appliances, which explains why certain appliances may appear to have been used.

Always use the filter during heating cycles.

Any supply connection error will negate the guarantee.

Thank you for buying a Tefal kettle.

DESCRIPTION

A.Lid

B.l/0 (ON/OFF) switch

C.LED indicator (depending on model)

D.Water level gauge

E.Scale filter

F.Voltage selector

G.Power cord clip

H.2 cups (depending on model)

I.2 spoons (depending on model)

J.Storage bag (depending on model)

BEFORE FIRST USE

1.Remove all packaging, stickers and accessories from the inside and outside of the kettle.

2.Unwind the power cord completely (fig 1).

3.Set the voltage selector (F) (located under the base) (fig. 2) to the same voltage as that of the

20

Page 22
Image 22
Tefal KO120110 manual Description, Before First USE, Unwind the power cord completely fig