system where you are using a coin, for example. If the voltage selected is 120 V, the kettle operates between 100 and 120 V. If 240
V is selected, the kettle operates between 220 and 240 V.
ATTENTION! Check, if necessary, that you have an adapter which complies with the safety standards of the country.
USING THE KETTLE
1 Pull up to open the cover (fig.3).
2 Place the kettle on a smooth, clean and cool surface.
•Your kettle must only be used with its own scale filter.
3 Fill the kettle with the required quantity of water. (Fig 4)
•You can fill the kettle by the spout, which helps to keep the filter in good condition. Otherwise, at least cover the heating coil (or the bottom of the kettle).
•Do not fill the kettle when it is plugged into the mains.
•Do not fill the kettle above the maximum level. If the kettle is overfilled, boiling water may spill over the top.
•Do not use without water.
4 Close the cover by pressing down firmly.
•Check that the lid is closed correctly before use.
5 Plug into the mains.
6 To start the kettle.
•Press the l/0 button at the top of the handle. (fig 6)
7 The kettle will stop automatically.
•As soon as the water boils, you can stop the kettle manually by pressing the l/0 button. Depending on the model, the light inside the kettle or the indicator light will be extinguished when the water boils. Check that the l/0 button is in the 0 position after the water has boiled and that the kettle is not operating before unplugging it.
•Do not use the water from the
first two or three uses of the kettle, as it could contain dust. Rinse the kettle and the filter separately.
8 Storage of the kettle.
•Empty the water from the kettle, and leave it to cool down before wiping it dry. Wind the power cord around the appliance. According to the model, store it in the bag with its accessories.
•If necessary, the bag may be washed by hand.
CLEANING AND MAINTENANCE
Cleaning the kettle
•Unplug it.
•Leave it to cool down and clean it with a damp sponge.
•Do not immerse the kettle, the power cord or the plug in water: the electrical connections and switch must not be brought into contact with water.
•Do not use scouring pads.
Cleaning the filter (depending on model) (fig. 5)
21
