EN

If ingredients stick to the sides of the bowl when mixing, stop the appliance. Remove the blender, and push the food down onto the blades and put your blender back to continue your preparation.

•Never fill the blender jug with boiling liquid. Only use liquids or foods at simmering temperatures or below.

•Never run the blender jug empty.

•Always use the blender jug with its lid.

•Never remove the lid before the blades have stopped completely.

•Always pour liquid ingredients into the blender jug first before adding solid ingredients.

2.3 - DISMANTLING THE ACCESSORY

•Wait for the appliance to come to a complete stop before removing the blender by unlocking it in the anti-clockwise direction and put back the cover (A5) by locking it on the outlet (A4) (clockwise).

3 - MINCING (DEPENDING ON MODEL)

ACCESSORIES USED :

-Attachment holder (E)

-Assembled mincer head (F)

3.1 - FITTING THE MINCER ATTACHMENT

•Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place. (Fig 3.1a).

•Place the attachment (E) and lock it in the anti-clockwise direction such that the outlet is in alignment with the appliance. (Fig 3.1b).

•Place the multi-function head (A3) in the horizontal position by pressing the button (A2) once again.

3.2 - ASSEMBLING THE MINCER HEAD

•Hold the body (F1) by the feed tube, with the wider opening uppermost.

•Insert the feed screw (F2) (long shaft first) into the body (F1). (Fig 3.2a).

•Fit the blade (F3) onto the short shaft protruding from the feed screw (F2) with the cutting edges facing outwards.

•Fit the chosen screen (F4 or F5) on the blade (F3), aligning the two lugs with the two notches in the body (F1).

•Screw the nut (F6) home on the body (F1) in the clockwise direction, without locking it.

•Check the assembly. The shaft should have no play, neither should it be able to turn on its own. Otherwise, repeat the assembly procedure. (Fig 3.2b).

3.3 - FITTING THE MINCER HEAD ON THE APPLIANCE

•Facing the attachment outlet (E), insert the assembled mincer head (F) inclined to the right, aligning the two bayonets in the mincer head with the two notches in the attachment. Push the mincer head home into the attachment and turn the mincer head anti-clockwise until it latches with the feed tube in the vertical position. (Fig 3.3a).

•Place the removable tray (F8) on the feed tube. (Fig 3.3b).

•Turn the safety cover (A5) clockwise on the high speed outlet (A4).

3.4 - USAGE, TIPS AND DISMANTLING

•Make sure that the safety cover (A5) is locked correctly (clockwise) on the high-speed outlet (A4).

•Place a container to collect the preparation in front of the appliance.

•Run the appliance by turning the selector (A1) to speed “3” or “4”.

•Push the meat, piece by piece, down the feed tube, using the pusher (F7).

•To stop the appliance, turn the selector to “0” speed and wait for the appliance to come to a complete stop.

•Unlock the mincer head in the reverse order of the assembly.

Never push the ingredients down the feed tube with your fingers or any other utensil.

Tips :

-Prepare all of the foodstuffs to be minced (for meat, remove the bones, gristle and tendons and cut it into pieces of approximately 2 x 2 cm).

-Make sure that frozen meat is thoroughly thawed.

-At the end of the operation, you can feed a few small pieces of bread into the feed tube to clear any meat remaining in the machine.

11

TE_KITCHEN-8080012367.indd 11

 

 

5/2/13 8:49 PM