EN

down completely.

• For best results, clean the filter after every 300 g of ingredients.

Important: When the pulp collector is full, stop the appliance and empty the collector.

•To stop the appliance, turn the selector to “0” speed and wait for the appliance to come to a complete stop.

•To remove the juice extractor, unlock it by turning it anti-clockwise.

•Place the locking lever (h6) in the open padlock position. Open the lid (open padlock position). You can then remove the filter (H3) to clean it and empty the collector (H4).

Wait until the rotary filter comes to a complete stop before removing the assembly from the appliance.

Tips :

•You can make juice from: carrots, tomatoes, apples, grapes, raspberries, etc.

•Peel fruits with thick skins; remove stones and the core of pineapples.

•It is not possible to extract juice from certain fruits and vegetables: bananas, avocado pears, blackberries, etc.

•You can prepare juices with different fruits and vegetables without having to clean the juice extractor every time, the flavours will not be mixed. Just run the extractor with a little water to rinse it between two different juices.

•Drink the juices immediately after preparation, and add lemon juice to keep them in the fridge for a few hours.

6 - ADJUSTING THE CORD LENGTH

For more comfortable use or for storage, you can reduce the cord length by pushing it inside the motor unit (a) via the opening on the rear (a7). (Fig 6).

7 - FINELY CHOPPING SMALL QUANTITIES (DEPENDING MODEL)

ACCESSORY USED :

- Assembled grinder (i), (refer to the grinder instruction booklet for details on assembly).

You can use the grinder to :

-Chop in a few seconds by pulsing: dried figs, dried apricots, etc. Quantity / max time: 100g / 5s

This grinder is not designed for hard products like coffee beans or hard spices.

CLEANING

•Unplug the appliance.

•Do not immerse the motor unit (a) or the attachment (E) in water or under running water. Wipe them with a dry or slightly damp cloth.

•For easier cleaning, rinse the accessories quickly after use. Dismantle the mincer head assembly fully.

Handle the blades with care to prevent injury.

•Wash, rinse and dry the accessories: they are dishwasher-safe, except for all the metal components in the

mincer head: body (F1), feed screw (F2), blade (F3), screens (F4 and F5), nut (F6).

•The screens (F4) and (F5) as well as the blade (F3) must remain greased. Coat them with cooking oil.

Tips :

•In the event any of your accessories are coloured by food (carrots, oranges, etc.), rub with a cloth soaked in cooking oil and then clean them as usual.

•Blender jug (d): pour some hot water containing a few drops of washing up liquid into the blender. Close the lid. Place it on the appliance and pulse a few times. After removing it, rinse the jug in running water and allow to dry (jug upside down).

13

TE_KITCHEN-8080012367.indd 13

 

 

5/2/13 8:49 PM