![](/images/new-backgrounds/1314202/31420217x1.webp)
Using myPower ALL Plus
The main output port (DC OUT) on myPower ALL Plus can be used to power and/or charge any portable device that requires between 9.5V and 20V (and some power devices that require slightly more voltage). At the same time or separately, the USB output port can be used to power and charge smaller devices requiring 5V.
To use myPower ALL Plus to power and/or charge your device, take these steps which are described in detail in the following sections.
•Select an output adapter tip for your main device and connect the plug to the output cord.
•Connect the power output cord to myPower ALL Plus.
•Connect the power output cord/output adapter tip to your laptop. See Adapters on page 11 for detailed information about the adapter tips.
•Connect a second 5V device using an adapter, or with the device USB cable.
You also can charge your laptop and myPower ALL Plus at the same time by plugging the laptop power adapter into myPower ALL Plus. In this case, the output current should be less than 5A to power and/or charge your device.
Select/Connect the Adapter Tip
1.Locate the polarity symbol on your device in the area around the power connector jack:
Center Positive | Center Negative |
WARNING: myPower ALL Plus supports Center Positive polarity only. If your device has a Center Negative polarity, do not power the device with myPower ALL Plus; contact support@tekkeon.com for assistance.
USER GUIDE | 7 |