SETTING UP YOUR MACHINE
Be sure to wipe off any surplus oil from needle plate area before using your machine the first time.
Power line cord/FOOT CONTROL
Connect the plug of the power line cord into the cord socket (1) and your wall outlet (2) as illustrated.
Connect the foot control plug into the machine socket (3), when using sewing machine only.
Set power/light switch at “OFF”
Mettez l’interrupteur moteur/ lumière sur “OFF”.
Poner el Interruptor de corriente/ luz de velocidad en “OFF”
machine socket
Connecteur de la machine
Conector de la máquina
NOTE: In sewing mode, the machine can be operated either with or without the foot control (see page 28 - 29).
Always disconnect the machine from power supply by removing the plug from the wall- outlet.
POWER/LIGHT SWITCH
Your machine will not operate until the power/light switch is turned on. The same switch controls both the power and the light.
When servicing the machine, or when changing needles or lights, etc., the machine must be disconnected from the power supply.
2
1
Pin 
3
Butée
Pasador 
Power line cord
Cordon
Cordón de la linea eléctrica
Foot control
Rhéostat
Control por pedal
Power/light switch “OFF” Interrupteur moteur/lumière “OFF” Interruptor corriente/luz “OFF”
Power/light switch “ON” Interrupteur moteur/lumière “ON” Interruptor corriente/luz “ON”
SPOOL PINS
HORIZONTAL SPOOL PIN for normal thread spool
Place thread spool on the pin and secure with a spool cap to ensure smooth flow of thread.
VERTICAL SPOOL PIN for large thread spool
Attach the spool pin. Place felt disc over it. Place a thread spool on the spool pin.
Spool
Bobine
Carrete
Felt disc
Rondelle feutre
Disco del pasador carrete
Vertical spool pin
Pasador de carrete vertical
Thread retaining slit
Fente de retenue de fil
Ranura de retención de hilo
Spool pin cap | Spool | Spool pin |
Bobine | ||
Tapa del pasador carrete | Carrete | Pasador carrete |
10
