OPERATION SWITCHES WHEN EMBROIDERY UNIT IS ATTACHED
OPERATION SWITCHES
START/STOP BUTTON
When start/stop button is pushed, machines starts slowly. To stop the machine, push the button again and the machine will stop sewing and the needle stops at its highest position.
FORWARD STITCH BUTTON
After the embroidery design has been transferred to the machine, the embroidery can be advanced one stitch at a time. Note: The embroidery hoop will move as it is advancing through the design.
To advance continuously, press and hold this button.
REVERSE STITCH BUTTON
To back up through a design that is already in progress, press the Reverse Stitch button. Pressing the button once will reverse one stitch at a time. To reverse continuously, press and hold this button. Design may be reversed all the way back to the first stitch of the design.
LED INDICATOR
Green light indicates machine is ready to start.
Red light indicates machine is operating.
Flashing red light indicates a problem or an error.
* Flashing for 2 - 3 seconds shows that an incorrect operation was made.
* Continuous flashing indicates that the machine malfunctions.
Forward stitch button Interupteur couture avancé
Interruptor de puntadas hacia adelante
| Reverse stitch button |
| Interrupteur couture arrière |
| interruptor de puntadas |
| hacia atrás |
| Start/stop button |
LED indicator | (For embroidery only) |
Interrupteur marche/arrêt | |
Témoin a diode | (Pour la broderie seulement) |
Indicador LED | Pulsador de comienzo/parada |
| (Sólo para bordado) |
THREAD TENSION CONTROL
Set it at “E” for embroidery to loosen thread tension.
You may wish to
NOTE: When sewing designs created by the software for Photo Stitch (optional) it is recommended to decrease the thread tension toward “0” and activate the “Speed limiter”, by checking the box in Machine navigator, before sending the design to the machine. This ensures the best performance of the machine.
76
