PREPARING THE MACHINE BEFORE INSTALLING THE HOOP
1.Turn hand wheel counter clockwise (toward you) until the needle comes to its highest position.
ATTACHING AND REMOVING
EMBROIDERY HOOP
1.Raise presser foot and needle, and push up lever (A) of embroidery foot with your finger and pass embroidery hoop under it.
To remove, pull the hoop forward to slide it out from underneath the embroidery foot.
2.Slide the hoop onto the embroidery unit from front to back until it clicks into place.
To remove, press the release lever and slide the hoop towards you.
NOTE: Before attaching small hoop, turn on power switch to move the carriage to embroidering standby position.
1 |
|
1 | (A) |
Carriage
2Chariot
Carro
Hoop mounting plate
Plaque de montage de cerceau
Placa de montaje de aro
Hoop release lever
Levier de retrait du cerceau.
Palanca de liberación del aro
70
