Getting Started
1–4 1780R-Series Operator’s Manual
1780R-Series PackageThe 1780R-Series is supplied as a single 5 1/4-inch high package,
ready for rack-mounting. A portable cabinet is available, providing
handle, feet, and front and rear covers. The instrument is equipped
with a high reliability cooling fan so that no clearance is required
above or below the 1780R-Series.
Mechanical InstallationAll qualification testing for the 1780R-Series was performed with
the rack-mount cabinet installed. To guarantee compliance with
specifications, the instrument should be operated in a cabinet, either
the rack-mount cabinet or the portable case (1780F02). The 1780F02
case has a handle and front and back covers. The front and back
covers provide protection for the instrument during transportation
and storage.
NOTE. Cabinet drawings are provided for installation information
only, and are not to scale. All dimensions are in inches.
The rack-mounting cabinet is a standard accessory; all instruments
are factory shipped in this cabinet. Rack-mounting hardware is
included and listed in Table 1–1. The portable case (1780F02) is
available from Tektronix as an Optional Accessory. It, as does the
rack-mounting cabinet, provides the proper electrical environment
for the instrument, supplies adequate shielding, minimizes handling
damage, and reduces dust collection within the instrument.
Rack-MountingThe 1780R-Series rack-mounting cabinet is designed for permanent
mounting. The instrument slides in and out of the cabinet with
relative ease. The instrument is secured in the cabinet with four 6–32
TORXR drive screws. See Figure 1–1.
Getting Started
1–4 1780R-Series Operator’s Manual
1780R-Series PackageThe 1780R-Series is supplied as a single 5 1/4-inch high package,
ready for rack-mounting. A portable cabinet is available, providing
handle, feet, and front and rear covers. The instrument is equipped
with a high reliability cooling fan so that no clearance is required
above or below the 1780R-Series.
Mechanical InstallationAll qualification testing for the 1780R-Series was performed with
the rack-mount cabinet installed. To guarantee compliance with
specifications, the instrument should be operated in a cabinet, either
the rack-mount cabinet or the portable case (1780F02). The 1780F02
case has a handle and front and back covers. The front and back
covers provide protection for the instrument during transportation
and storage.
NOTE. Cabinet drawings are provided for installation information
only, and are not to scale. All dimensions are in inches.
The rack-mounting cabinet is a standard accessory; all instruments
are factory shipped in this cabinet. Rack-mounting hardware is
included and listed in Table 1–1. The portable case (1780F02) is
available from Tektronix as an Optional Accessory. It, as does the
rack-mounting cabinet, provides the proper electrical environment
for the instrument, supplies adequate shielding, minimizes handling
damage, and reduces dust collection within the instrument.
Rack-MountingThe 1780R-Series rack-mounting cabinet is designed for permanent
mounting. The instrument slides in and out of the cabinet with
relative ease. The instrument is secured in the cabinet with four 6–32
TORXR drive screws. See Figure 1–1.