xiii
Safeguards and Notices
Cautions
■
To prevent damage to equipment when replacing fuses, locate and correct the
trouble that caused the fuse to blow before applying power.
■
Verify that all power supply lights are off and that the power supply cords are
unplugged before removing power supply or servicing equipment.
■
Use only specified replacement parts.
■
Follow static precautions at all times when handling this equipment.
■
Leave the back of the frame clear for air exhaust cooling and to allow room for
cabling. Slots and openings in the cabinet are provided for ventilation. Do not
block them.
■
Front door is part of fire enclosure and should be kept closed during normal
operation.
■
Circuit boards in this product are densely populated with surface mount and
ASIC components. Special tools and techniques are required to safely and
effectively troubleshoot and repair modules that use SMT or ASIC
components. For this reason, service and repair of GVG products
incorporating surface mount technology are supported only on a module
exchange basis. Customers should not attempt to troubleshoot or repair
modules that contain SMT components. GVG assumes no liability for damage
caused by unauthorized repairs. This applies to both in- and out-of-warranty
products.EMC Regulatory Notices
Federal Communications Commission (FCC) Part 15 Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received including interference
that may cause undesireable operations.