Maintenance
18 P6701B, P6703B, and P6723 Service Manual
NOTE. Cleaning kits for fiber-opticconnectors are available from a number of
suppliers.
Cleaning the External Parts
Remove dirt with a softcloth dampened in a mild detergent and water solution or
isopropyl alcohol.
CAUTION. Toavoid damaging the probe, use only a mild detergent and water
solution or isopropylalcohol; do not use any other solvents or abrasive
cleaners. Do not immerse the probe.
Handling
Even though the fiber-opticcable of the P6701B, P 6703B, or P6723 O/E
Converter is protectedby a jacket and strain relief, the fiber-optic cableshould
be handled carefullyat all times.
CAUTION. Toavoid damaging the P6701B, P6703B, and P6723 O/E Converters,
take the following precautions:
Do not crush, crimp, or sharply bend the fiber optic cable.
Do not pull or yank the fiber-optic cable.
Do not drop the converterassembly since damage and misalignment of the
photodiode optical assembly can result.Store the converter in a secure location
when not in use.
Replace the protectivecap on the connector when the converter is not in use.
The P6701B, P6703B, and P6723 O/E Converters can connect to opticalfibers
with a corediameter of up to 62.5 m through one of the FC, ST, SC, or DIN
adapters. Adaptercables that aid in connecting many other popular optical
connectors are also available. (Refer to Optional accessories on page 24.)