2.5 Connecting the SIP ND2100 Series to the network

WARNING! Risk of electrical shock! Dangerous voltages may be present on the terminals of the network patch cable after it is plugged into the network wall jack. Connect the patch cable to the base first, then to the network wall jack.

2.5.1SIP ND2100 Series Version 1 (Local Power) Connect Network to the Inline Power Adapter.

For this version, the network interface is assumed to NOT be PoE compatible. For installation within North America, Teledex provides an inline power adapter, which has two network ports labeled “PHONE” and “LINE” respectively. (For installation outside North America, please contact Teledex for information on obtaining an approved inline power adapter.)

Plug one end of a network patch cable into the RJ-45 jack at the top of the SIP ND2100 series base. Connect the other end of this cable to the RJ-45 jack labeled “PHONE” on the power adapter. With a second network patch cable, plug one end into the RJ-45 jack labeled “LINE” on the power adapter. Connect the other end of this cable to the network wall jack designated by the network administrator. Plug the power adapter into an unswitched electrical outlet.

2.5.2 SIP ND2100 Series Version 2 (PoE)

For this version, the network interface is assumed to be PoE compatible, and power present at the Ethernet jack. Plug one end of a network patch cable into the RJ-45 jack at the top of the SIP ND2100 series base. Connect the other end of this cable to the network wall jack designated by the network administrator.

2.5.3 SIP ND2100 Series Version 3 (Dual power)

This version can work in either local power or PoE mode, according to the different setup of the power jumpers underneath the phone. When the phone is set to work in the local power mode, connect to the network through the inline power adapter as described in subsection 2.5.1. When the phone is configured to work in PoE mode, follow the instructions described in subsection 2.5.2.

CAUTION: Do not connect a standard telephone line cord to the network RJ-45 jack. A standard telephone cord connector can fit into the RJ-45 jack; however there is a risk of damaging the equipment if this is done.

NOTE: The SIP ND2100 series will not function until it has been configured and activated by the network administrator.

2.6 Connecting a PC to the SIP ND2100 Series

If the installation environment has only one active network jack, and another network device such as a PC must share the same space, that device should be disconnected from the wall jack and reconnected to the RJ-45 jack on the right side of the SIP ND2100 series.

CAUTION: The cable from the network wall jack must be connected to the jack on the top of the phone, and if there is a PC, it must be connected to the jack on the right side of the phone. Otherwise the phone will not function.

2.7 Arranging the SIP ND2100 Series on the Desk or Table

Route the network cable toward the rear of the base of the phone, and attach the desk/wall mounting bracket by inserting the tabs into the matching holes in the base. Place the phone in a convenient location on the desk. Place the handset on the cradle and confirm that the hookswitch is properly depressed by the weight of the handset.

2.8 Mounting the SIP ND2100 Series on a Wall

The SIP ND2100 series can be mounted on a wall or other vertical or near-vertical surface surface. To do so, the desk/wall mounting bracket should be rotated 180 degrees, compared to the desk mounting position. Use screws (and anchors, if necessary) to match the hole pattern in the bracket. The wall mounting clip (just underneath the hookswitch) should be removed and re-installed after rotating it 180 degrees.

To remove the clip, push it firmly toward the hookswitch. The clip will hold the handset firmly in the cradle, and allow it to depress the hookswitch when the phone is not in use.

3. Configuring the SIP ND2100 Series

Once the SIP ND2100 series has been unpacked, set up on the desk (or mounted to a wall), and connected to the network, the network administrator should be notified that the unit is ready for network configuration and activation. Once this process has been completed, it will receive power from the network and begin to function.

3.1 Starting Up

The SIP ND2100 series will automatically begin to function once it has been connected to the network, configured and activated by the network administrator. The network will detect the presence of the SIP ND2100 series and supply power and data to it (there is no on/off switch). Once power has been applied, it takes about ninety (90) seconds for the SIP ND2100 series to be ready for configuration.

3.2 Online Configuation

The SIP ND2100 series supports web-based online configuration, and can be configured through another PC. The default IP address for the phone is 10.10.1.254. The network administrator should configure the SIP ND2100 series to another static IP address, or activate the DHCP function through the online configuration.

3.2.1 Visit the Configuration Portal (Fig.2)

Use the link http://(IP Address):8080 to access the web portal of the SIP ND2100 series. The default IP address is 10.10.1.254, so use the link http://10.10.1.254:8080. The username and password will be required to access to the web portal.

The default logins are (case sensitive):

Username: Admin

Password: iPhone06

4

Page 3 Page 5
Page 4
Image 4
Teledex Connecting the SIP ND2100 Series to the network, SIP ND2100 Series Version 2 PoE, Starting Up
Page 3 Page 5

SIP ND2100 specifications

The Teledex SIP ND2100 is an advanced IP phone designed to provide high-quality communication solutions for business environments. This model stands out due to its robust set of features, reliability, and user-friendly interface, making it an ideal choice for various organizational needs.

One of the primary features of the Teledex SIP ND2100 is its support for Voice over Internet Protocol (VoIP), which leverages the power of the internet for voice communications. This integration reduces telecommunications costs significantly while offering superior voice quality. The device utilizes the Session Initiation Protocol (SIP), enabling seamless integration with a wide range of VoIP platforms and ensuring compatibility with both cloud-based and on-premise telephone systems.

The ND2100 is equipped with a high-resolution graphical LCD screen that provides clear visibility for incoming calls, contacts, and menu options. The user interface is designed for ease of navigation, allowing users to access essential features with minimal effort. Programmable keys enable quick access to frequently used functions, such as speed dial, voicemail, and conference calling, enhancing user productivity.

This IP phone boasts advanced audio technology, ensuring clear call quality through wideband audio support. The built-in speakerphone allows hands-free communication, while noise reduction features minimize background distractions during calls. Additionally, the ND2100 supports multiple codecs, including G.711 and G.722, providing flexibility in audio quality and bandwidth usage.

Security is a critical aspect of modern communication, and the Teledex SIP ND2100 addresses this with robust encryption protocols, such as TLS and SRTP, safeguarding conversations and sensitive data from potential threats. The phone also supports Power over Ethernet (PoE), simplifying installation by allowing power and data to be delivered over a single Ethernet cable.

Moreover, the ND2100 features dual Ethernet ports, accommodating network flexibility by allowing users to connect additional devices, enhancing the connectivity ecosystem in any office environment. This model also supports multiple SIP accounts, making it suitable for organizations with complex communication needs.

In summary, the Teledex SIP ND2100 represents a versatile and intelligent choice for businesses seeking reliable IP telephony solutions. With its comprehensive feature set, superior audio quality, and secure connection capabilities, it is well-positioned to meet the demands of today's dynamic communication landscape. Whether for individual use or in a shared workspace, the ND2100 provides the tools necessary for effective communication.
Top Page Image Contents