Manuals / Teledyne / Personal Care / Oxygen Equipment

Teledyne 3110 operating instructions Calibration Procedure for Trace Analysis

Models: 3110

1 52
Download 52 pages 44.25 Kb
Page 21
Image 21

Portable Trace Oxygen Analyzer

Installation

 

 

2.4 Calibration

Calibration involves using a span gas to set the span of the instrument. The proper span gas concentration depends on the range that the instrument will be used on. The correct concentration should be 80- 90% of the range used. For instance, if the analyzer is to be used on a range of 0-150 ppm oxygen, then a span gas should be prepared with 120-135 ppm oxygen in nitrogen.

2.4.1 Calibration Procedure for Trace Analysis

To calibrate the Model 3110, the instrument must be fitted with a trace sensor. The instrument must also be purged overnight using a zero gas (a pure gas with no oxygen, typically O2 free N2) before calibrating. For A-2C type cells, match the CO2 content in the span gas to that of the sample gas.

To calibrate the analyzer for trace analysis:

1.Purge the analyzer overnight.

2.Purge the calibration gas sample line, regulator, and control valve. See Section 2.4.3.

3.Set the calibration gas flow rate to 1 SCFH.

4.Attach the vent line followed by the span gas line using the quick disconnect fittings.

5.Navigate to the SPAN VALUE screen (see Section 3.2.13) and set the span value to the known oxygen concentration in ppm of the span gas.

6.Observe the oxygen reading on the screen to determine when the reading has stabilized.

7.Navigate to the SPAN screen and select SPAN: START.

8.When the screen changes and displays SPAN: FINISH, select

SPAN: FINISH to set the span.

9.Allow the span gas to flow for several minutes to verify the proper span setting.

10.Calibration is complete. Remove the span gas line first followed by the vent line.

Teledyne Analytical Instruments

21

Page 20 Page 22
Page 21
Image 21
Teledyne 3110 operating instructions Calibration Procedure for Trace Analysis
Page 20 Page 22

3110 specifications

The Teledyne 3110 is a sophisticated, high-performance data acquisition and analysis system that has garnered attention in a range of scientific and industrial applications. Designed with advanced technologies, the Teledyne 3110 is optimized for versatility, enabling users to gather and analyze data from various sources with seamless integration.

One of the main features of the Teledyne 3110 is its modular design. This allows users to customize the system to meet their specific needs by adding or removing modules as necessary. It supports a wide range of input types, making it compatible with numerous sensors and devices, which enhances its utility in diverse environments.

The device boasts high precision and accuracy in data collection, which is crucial for applications where minute measurements matter. The instrument employs cutting-edge analog-to-digital converters, ensuring that data is captured with remarkable fidelity. Additionally, the Teledyne 3110 incorporates advanced signal processing technologies that improve data quality and reduce noise, facilitating clearer and more reliable analysis results.

Another key characteristic of the Teledyne 3110 is its user-friendly interface. The system comes equipped with intuitive software for data visualization and analysis, allowing users, even those with limited technical experience, to navigate the system efficiently. With comprehensive data export options, users can easily integrate the system's outputs into other software for further analysis and reporting.

Durability and reliability are also hallmarks of the Teledyne 3110. Built to endure harsh environments, the system is tested rigorously to ensure it meets high standards for protection against dust, moisture, and temperature variations. This robustness makes it applicable in fields such as environmental monitoring, industrial automation, and research laboratories.

Furthermore, the Teledyne 3110 supports real-time monitoring and data logging capabilities. This feature is essential for applications that require continuous oversight and data collection to respond promptly to any changes in conditions or parameters being monitored.

In summary, the Teledyne 3110 stands out as a versatile and reliable data acquisition system, leveraging modularity, precision, user-friendliness, and durability to serve a variety of applications effectively. Whether for research, industrial applications, or environmental monitoring, the Teledyne 3110 proves to be an invaluable tool for professionals seeking high-quality data insights.