Manuals / Teledyne / Personal Care / Oxygen Equipment

Teledyne 3110 operating instructions Leak Testing, Procedure

Models: 3110

1 52
Download 52 pages 44.25 Kb
Page 46
Image 46

Maintenance

Model 3110

 

 

4.8 Leak Testing

WARNING: IF A LEAK IS SUSPECTED IN THE UNIT, DO NOT ATTEMPT TO TIGHTEN THE QUICK DISCONNECT FITTINGS. THE FITTINGS ARE POTTED IN EPOXY AND TIGHTENING THEM WILL BREAK THE SEAL.

To check for leaks, TAI recommends one of the following procedures:

Procedure I:

1.Purge the instrument to as low a value as possible. Use a sensitive range for analysis for instance, 0-1% range. Take note of the oxygen concentration.

2.Place the vent line in water and disconnect the sample.

3.Next, disconnect the vent line and use the same analysis range. The reading should not increase above the level to which you purged to.

Procedure II:

1.Purge the instrument with nitrogen at the sample port.

2.Using a flow rate of approximately 1 SCFH, note the reading once it has stabilized (at least 24 hours on the 0-10 PPM range).

3.Increase the flow rate from 1 SCFH to 2 SCFH.

4.Note how much the reading has changed after a few minutes.

5.Reduce the flow rate to 0.5 SCFH.

6.Note how much the reading has changed.

7.The reading should change by less than 10% of the original value.

46 Teledyne Analytical Instruments

Page 45 Page 47
Page 46
Image 46
Teledyne 3110 operating instructions Leak Testing, Procedure
Page 45 Page 47

3110 specifications

The Teledyne 3110 is a sophisticated, high-performance data acquisition and analysis system that has garnered attention in a range of scientific and industrial applications. Designed with advanced technologies, the Teledyne 3110 is optimized for versatility, enabling users to gather and analyze data from various sources with seamless integration.

One of the main features of the Teledyne 3110 is its modular design. This allows users to customize the system to meet their specific needs by adding or removing modules as necessary. It supports a wide range of input types, making it compatible with numerous sensors and devices, which enhances its utility in diverse environments.

The device boasts high precision and accuracy in data collection, which is crucial for applications where minute measurements matter. The instrument employs cutting-edge analog-to-digital converters, ensuring that data is captured with remarkable fidelity. Additionally, the Teledyne 3110 incorporates advanced signal processing technologies that improve data quality and reduce noise, facilitating clearer and more reliable analysis results.

Another key characteristic of the Teledyne 3110 is its user-friendly interface. The system comes equipped with intuitive software for data visualization and analysis, allowing users, even those with limited technical experience, to navigate the system efficiently. With comprehensive data export options, users can easily integrate the system's outputs into other software for further analysis and reporting.

Durability and reliability are also hallmarks of the Teledyne 3110. Built to endure harsh environments, the system is tested rigorously to ensure it meets high standards for protection against dust, moisture, and temperature variations. This robustness makes it applicable in fields such as environmental monitoring, industrial automation, and research laboratories.

Furthermore, the Teledyne 3110 supports real-time monitoring and data logging capabilities. This feature is essential for applications that require continuous oversight and data collection to respond promptly to any changes in conditions or parameters being monitored.

In summary, the Teledyne 3110 stands out as a versatile and reliable data acquisition system, leveraging modularity, precision, user-friendliness, and durability to serve a variety of applications effectively. Whether for research, industrial applications, or environmental monitoring, the Teledyne 3110 proves to be an invaluable tool for professionals seeking high-quality data insights.