Teledyne T265 manual Getting Started, Unpacking, Could Damage Instrument And Void Warranty

3. GETTING STARTED

This section addresses the procedures for unpacking the instrument and inspecting for damage, and introduces the instrument layout, then presents the procedures for getting started: making electrical and pneumatic connections, and conducting an initial calibration check. Please see the Model T200 Operation Manual for more information.

3.1 UNPACKING

CAUTION – GENERAL SAFETY HAZARD

To avoid personal injury, always use two persons to lift and carry the Model T265.

ATTENTION

COULD DAMAGE INSTRUMENT AND VOID WARRANTY

Printed Circuit Assemblies (PCAs) are sensitive to electro-static discharges too small to be felt by the human nervous system. Failure to use ESD protection when working with electronic assemblies will void the instrument warranty

See A Primer on Electro-Static Discharge in the accompanying Model T200 manual for more information on preventing ESD damage.

CAUTION - ELECTRICAL SHOCK HAZARD

Never disconnect PCAs, wiring harnesses or electronic subassemblies while

analyzer is under power.

07337B DCN6324

13