Telenetics V.34-SDC, 326X V.34 manual Performing Numeric Entry, Front Panel Option Description

Performing Numeric Entry

The following options require you to enter information using the front panel or ACU.

Front Panel Option	Description
Enter Phone #=n	Stores phone number to phone book memory in location n.
Enter Then Dial	Lets you dial from the front panel.
S-Reg xxx=nnn	Lets you set S-Register xxx to nnn.
LPDA-2 Addr=nnn	Lets you set the LPDA2 address.
Enter PW:nnnn	Lets you unlock a modem’s password protection.
Old PW:nnnn	Lets you enter old password.
New PW:nnnn	Lets you configure new password.
Verify PW:nnnn	Lets you verify new password.
Enter Group PW:	Lets you verify group password.
NC Address:nnn	Lets you set network control address.
New Address:nnn	Lets you set remote modem’s leased line address.
Rmt Ser:nnnnnnn	Lets you enter remote modem’s serial number.

The keystrokes to set the numeric entry for these options are as follows:

1)Step across the front panel menu by pressing until the option you want to change displays.

2)Press . You are now ready to key in the numeric entry.

3)Press until the digit or character you want appears in the leftmost position of the display.

Example: 1xxxxx

4)Press . The display shifts one position to the left, and the second character position is displayed.

5)Repeat Steps 3 and 4 until you have completed keying in the numeric entry. To

re-enter a number or character, press to place the cursor at the beginning of the line, then re-enter the number or character.

6)Press to save your selection.

Configuration

Quick-Reference

Configuration Quick Reference A-37