Telenetics 326X V.34 Status Displays, Example Accessing a Configuration Option, Talk/Data Switch

Getting Started

DATA 9600 T/D?

Select Options

Table 3-2.

Front Panel Keys

Keys	Function
	Steps through categories (example: Data 9600 T/D?, TEST OPTS,
Down	MODULATION OPT’S), or, at a parameter within a category, scrolls through
	the options.
	Selects an option and/or initiates an action. This key also serves as a Talk/Data
Enter	“softkey,” allowing you to toggle between using a telephone and the modem to
	establish a telephone connection.

NOTES:

1)If you hold the or key down, it repeats until you stop pressing.

2)With the 3262/3267 Modems, to toggle between modem A and modem B front

panels, hold while pressing .

Example: Accessing a Configuration Option

To select a predefined configuration option set:

1)From the Data 9600 T/D? display, press until Select Options=1 displays.

2)Press to display Select Options:2, Select Options:3, or Select Options:4.

3)Press to select an option. The modem is now configured for the option.

Status Displays

The Data 9600 T/D? category is the default display when the modem is powered-up or after the modem has “timed-out” (i.e., the front panel control keys have not been used for at least five minutes). The data rate (9600, in the display Data 9600 T/D?) is the current DCE (modem-to-modem) data rate. It varies with the speed at which the modems connect. The Data 9600 T/D? category serves three primary functions:

•Talk/Data” Switch

•Operating Status Displays

•Option Sets/Dialing Options

Talk/Data Switch

Pressing when Data 9600 T/D? is displayed toggles the modem between using:

•An external telephone to manually dial a telephone call

•The modem to dial a stored or unstored telephone number

3-6 Getting Started