Telex MS-2002 user manual Switch #, Description, Settings, Default, DIP SWITCH SW1 INTERNAL

Switch #	Description	Settings	Default
	DIP SWITCH SW1 (INTERNAL)
SW1-1	Headset Microphone Type	On: Unbalanced	Off
		Off: Balanced
SW1-2	Call Signal Send, channel 1	On: Enabled	On
		Off: Disabled
SW1-3	Call Signal Receive, channel 1	On: Enabled	On
		Off: Disabled
SW1-4	Call Signal Send, channel 2	On: Enabled	On
		Off: Disabled
SW1-5	Call Signal Receive, channel 2	On: Enabled	On
		Off: Disabled
SW1-6	Mic Kill Signal Send	On: Enabled	Off
		Off: Disabled
SW1-7	Program 2	On: Interrupt During Talk	Off
		Off: No Interrupt
SW1-8	Program 1	On: Interrupt During Talk	Off
		Off: No Interrupt
	BALANCED (BAL) - UNBALANCED (UNBAL) OPERATION
	BOTH SWITCHES MUST BE SET THE SAME
	FACTORY DEFAULT IS BALANCED
Rear Panel	Audiocom or Clear-Com operation	Out: Balanced (Audiocom)	Out (BAL)
		In: Unbalanced (Clear-Com)
Rear Panel	Audiocom or Clear-Com operation	Out: Balanced (Audiocom)	Out (BAL)
		In: Unbalanced (Clear-Com)
	DIP SWITCH SW3 (INTERNAL)
	*SET ALL TO MONAURAL OR ALL TO BINAURAL
SW3-1	Incoming Call Beep	On: Disabled	Off
		Off: Enabled
SW3-2*	Listen 1 to speaker 1 only	On: Enabled (Binaural)	Off
		Off: Disabled (Monaural)
SW3-3	Incoming Call Beep, Speaker 1	On: Enabled (SW3-1 must be OFF)	Off
		Off: Disabled
SW3-4	Incoming Call Beep, Speaker 2	On: Enabled (SW3-1 must be OFF)	Off
		Off: Disabled
SW3-5	Listen 2 to Right Headphone	On: Enabled (Monaural)	On
		Off: Disabled (Binaural)
SW3-6	Listen 2 to Speaker 1	On: Enabled (Binaural)	Off
		Off: Disabled (Monaural)
SW3-7	Listen 2 to Speaker 2	On: Enabled (Monaural)	On
		Off: Disabled (Binaural)
SW3-8	Listen 1 to Left Headphone	On: Enabled (Monaural)	On
		Off: Disabled (Binaural)
TABLE 1. Configuration Switch Table

10