Master Station and Power Supply | Telex MS-2002 instruction

MS-2002

Master Station and Power Supply

User Manual

9350-7749-000 Rev J

1/2010

Image 1

Telex MS-2002 user manual Master Station and Power Supply

Contents

MS-2002 Master Station and Power Supply See the enclosed warranty card for further details Important Safety Instructions Page Contents Page Description Introduction MS-2002 Reference View Features Configuration Pre-check Installation Switch # Description Settings Default Mic Kill Send Enable DIP Switch Headset Microphone Type Selection DIP SwitchProgram Interrupt DIP Switches Incoming Call Beep DIP Switches Balanced Unbalance Switches Monaural or Binaural Operation DIP SwitchesDirect Program Listen Enable / Disable Jumpers Settings for Jumpers Connections MountingExternal Program Input and PA Output Cables Page MS-2002 Binaural Master Speaker Station Configuration MS-2002 Typical Speaker Station and Belt Pack Connections Page Audiocom Intercom Cables Page Power-Up Check Operation and SpecificationsTest Tone MS-2002 Bottom View Sidetone Adjustment Operation Voice-Activated Microphone VOX SetupTo check and set the VOX level, do the following Tap the Mic Kill key To mute the microphone during talk, do the following To call an intercom channel, do the following Public Address Using Mic KillTo use the public address system, do the following To turn the program inputs on and off, do the following To enable incoming call beep, do the following Using Voice-Activated Microphone VOXIncoming Call Beep on / OFF General Power Requirements Specifications Speaker Output Output Level Description Action Quick Reference