Press any key to restore the P170/P170v screen and all keypad functions.
FOCUS
To access
FOCUS
function, press and release MENU, then press either
the up or down arrow key to “step” through the “menu” until
FOCUS
is
displayed. Press either the right or left arrow key to select between six
possible image phase adjustment settings. An on-screen graphic will
indicate the
FOCUS
setting. FOCUS can be affected by the
WIDTH
control, refer to the Troubleshooting Guide
.
TINT
To access the
TINT
function, press and release
MENU
, then press either
the up or down arrow key to “step” through the “menu” until
TINT
is
displayed. Press the right arrow key to increase the red in the color
image. Press the left arrow key to increase the green in the color image.
An on-screen graphic will indicate the relative value of the
TINT
setting.
TONE
To access the
TONE
function, press and release
MENU
, then press either
the up or down arrow key to “step” through the “menu” until
TONE
is
displayed. Press the right arrow key to increase the high tones in the
speaker output. Press the left arrow key to decrease the high tones in the
speaker output. An on-screen graphic will indicate the relative value of
the
TONE
setting.
MIRROR
To access the
MIRROR
function, press and release
MENU
, then press
either the up or down arrow key to “step” through the “menu” until
MIRROR
is displayed. Press either the right or left arrow key to switch
between the standard or mirror (reverse) image. An on-screen graphic
will indicate the
MIRROR
setting.
WIDTH
To access the
WIDTH
function, press and release
MENU
, then press either
the up or down arrow key to “step” through the “menu” until
WIDTH
is
displayed. Press the right arrow key to expand the width of the image.
Press the left arrow key to contract the width of the image. An on-screen
graphic will indicate the relative value of the
WIDTH
setting.
WIDTH
may affect the
FOCUS
control, refer to the Troubleshooting Guide.
PALETTE
To access the
PALETTE
function, press and release
MENU
,thenpress
either the up or down arrow key to “step” through the “menu” until
PALETTE
is displayed. Press either the right or left arrow key to switch
between one of two color modes: 8-color or 16,194,277-color. An
on-screen graphic will indicate the
PALETTE
setting.
LAMP HOURS
To access the
LAMP HOURS
function, press and release
MENU
, then press
either the up or down arrow key to “step” through the “menu” until
LAMP HOURS
is displayed. An on-screen graphic will indicate the
current
LAMP HOURS
value. The
LAMP HOURS
value is based upon
an expected average lamp life of 40 hours. As the P170/P170v is used,
the lamp hour value is decremented from 40 toward 0. When the lamp
User Manual 19