OPERATION
After you have connected the MagnaByte®P170/P170v as described in
either the Quick Setup or P170/P170v Setup sections of this manual, you
are ready to begin using your color desktop LCD projector.
Basic Operation
1. Slideopen the lens cover doo r shown in Figure 13.
2. Turnon the P170/P170v desktop LCD projector. The POWER LED
(Figure 12) should now be steady orange, and the video source indi-
cators will be flashing to show that the MagnaByte®P170/P170v is
being initialized. After intialization is complete, the video source in-
dicators will then begin scanning to show that the P170/P170v is
waiting for a video signal from one of the video inputs.
WARNING! To prevent burns when the P170/P170v is operating,
avoid touching the lamp access door and the surrounding area of the
rear panel.
3. Turnon the attached computer/s. One of the source indicators will
be steady green to show that the MagnaByte®P170/P170v has ac-
quired a videosignal from that video source.
CAUTION! The cooling fan protects the MagnaByte®P170/P170v from
heat generated by the projection lamp. Always make sure that the air
intake and exhaust are not blocked.
!!
COMPUTER 1 COMPUTER 2 POWER
REPLACE
LAMP
S-VHSTV 2TV 1
Video Source
Indicators Power
LED
Lamp
Replacement
LED
Figure 12.
MagnaByte®
P170/P170v
Indicators
WARNING
User Manual 13